Front Regulator and Motor Assembly: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Remove the door glass. Ref. to REMOVAL , Front Door Glass.
Disconnect the motor connector.
Remove the four bolts and two nuts to remove regulator assembly.

Fig 1: Locating Regulator Assembly Bolts And Nuts
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws to remove motor assembly.

Fig 2: Locating Motor Assembly Screws
Courtesy of SUBARU OF AMERICA, INC.

NOTE: When removing the motor assembly, secure the arm correctly. Otherwise the regulator arm moves with the force of balancing spring.