Symptom Chart
CAUTION:
When measuring the voltage and resistance of each control module or sensor, use a tapered pin with a diameter of less than 0.64 mm (0.03 in) in order to avoid poor contact. Do not insert the pin more than 2 mm (0.08 in).
| Symptoms | Repair order | Note |
|---|---|---|
| Combination meter assembly does not operate. |
|
Refer to CHECK POWER SUPPLY AND GROUND CIRCUIT . |
| Speedometer does not operate. |
|
Refer to CHECK VDC CONTROL MODULE . |
| Tachometer does not operate. |
|
Refer to CHECK ENGINE CONTROL MODULE (ECM) . |
| Fuel gauge does not operate. |
|
Refer to CHECK FUEL LEVEL SENSOR . |
| ECO gauge does not operate. |
|
Refer to
CHECK ECO GAUGE .
NOTE:
The ECO gauge does not operate unless the vehicle is driven at least 1 km (0.6 mile) after the trip meter is reset.
|
| Engine coolant temperature gauge or engine coolant temperature indicator light/engine coolant temperature warning light does not operate. |
|
Refer to CHECK ENGINE COOLANT TEMPERATURE SENSOR . |
| Warning buzzer for key left in ignition does not sound. (Model without keyless access) |
|
Refer to CHECK WARNING BUZZER FOR KEY LEFT IN IGNITION (MODEL WITHOUT KEYLESS ACCESS) . |