Check Room Light Operation

Step	Check	Yes	No
1 CHECK ROOM LIGHT OPERATION . Make sure the room light illuminates when the room light switch is ON, and goes off when the switch is OFF.	Does the room light illuminate or go off?	Go to step 2 .	Check the room light circuit. <Ref. to INSPECTION , Room Light.>
2 CHECK ROOM LIGHT OPERATION . Turn the room light switch to the "DOOR" position. Open and close any door.	Does the room light illuminate ← → go off (including off delay) when the door is opened and closed?	Go to step 3 .	Go to step 4 .
3 CHECK KEYLESS ENTRY OPERATION . Press the LOCK/UNLOCK button of the keyless transmitter.	Does it operate properly?	Room light is normal.	Check keyless entry system. <Ref. to SYMPTOM CHART , INSPECTION, Keyless Entry System.>
4 CHECK ROOM LIGHT . Check the room light. <Ref. to INSPECTION , Room Light.>	Is room light normal?	Go to step 5 .	Replace the bulb or room light assembly.
5 CHECK HARNESS . Disconnect the connectors of body integrated unit and room light. Check the harness between body integrated unit and room light. Connector & terminal (i84) No. 4 - (R52) No. 2:	Is harness normal?	Go to step 6 .	Repair or replace the harness.
6 CHECK HARNESS . Measure the voltage between the room light connector and chassis ground. Connector & terminal (R52) No. 3 (+) - Chassis ground (-):	Is the voltage 10 V or more?	Replace the body integrated unit. <Ref. to BODY INTEGRATED UNIT .>	Repair or replace the harness.