Symptom Chart
| Symptoms | Repair order | Reference |
|---|---|---|
| None of the functions of the keyless entry system operate. | 1. Check the keyless transmitter battery. | <Ref. to CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System.> |
2. Remove and visually inspect the following fuses.
|
If the fuse is blown out, replace the fuse with a new part. When there is no defective with the fuse, check the power supply and ground circuit. <Ref. to CHECK POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Door Lock Control System.> |
|
| 3. Check the keyless entry control module. | <Ref. to CHECK KEYLESS ENTRY CONTROL MODULE , INSPECTION, Keyless Entry System.> | |
| 4. Check the power supply and ground circuit for body integrated unit. | <Ref. to CHECK BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT , INSPECTION, Keyless Entry System.> | |
| 5. Check the key warning switch. | <Ref. to CHECK KEY WARNING SWITCH , INSPECTION, Keyless Entry System.> | |
| 6. Check the body integrated unit. | <Ref. to Basic Diagnostic Procedure .> | |
| The keyless transmitter cannot be registered. | 1. Check the keyless transmitter battery. | <Ref. to CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System.> |
| 2. Check the key warning switch. | <Ref. to CHECK KEY WARNING SWITCH , INSPECTION, Keyless Entry System.> | |
| 3. Check the keyless entry control module. | <Ref. to CHECK KEYLESS ENTRY CONTROL MODULE , INSPECTION, Keyless Entry System.> | |
| 4. Check the body integrated unit. | <Ref. to Basic Diagnostic Procedure .> | |
| Door lock or unlock does not operate.
NOTE:
If the door lock control system does not operate when using the door lock switch, check the door lock control system. <Ref. to
INSPECTION , Door Lock Control System.>
|
1. Check the keyless transmitter battery. | <Ref. to CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION , INSPECTION, Keyless Entry System.> |
| 2. Check the key warning switch. | <Ref. to CHECK KEY WARNING SWITCH , INSPECTION, Keyless Entry System.> | |
| 3. Check the door switch signal. | <Ref. to CHECK DOOR SWITCH , INSPECTION, Keyless Entry System.> | |
| 4. Check the keyless entry control module. | <Ref. to CHECK KEYLESS ENTRY CONTROL MODULE , INSPECTION, Keyless Entry System.> | |
| 5. Check the body integrated unit. | <Ref. to Basic Diagnostic Procedure .> | |
| The keyless buzzer and hazard light do not operate. | 1. Check the keyless buzzer operation. | <Ref. to CHECK KEYLESS BUZZER , INSPECTION, Keyless Entry System.> |
| 2. Check the hazard light operation. | <Ref. to CHECK HAZARD LIGHT OPERATION , INSPECTION, Keyless Entry System.> | |
| 3. Check the body integrated unit. | <Ref. to Basic Diagnostic Procedure .> | |
| Room light does not operate. | 1. Check the room light operation. | <Ref. to CHECK ROOM LIGHT OPERATION , INSPECTION, Keyless Entry System.> |
| 2. Check the body integrated unit. | <Ref. to Basic Diagnostic Procedure .> | |
| Ignition switch illumination does not operate. | 1. Check the ignition switch illumination. | <Ref. to CHECK IGNITION SWITCH ILLUMINATION , INSPECTION, Keyless Entry System.> |
| 2. Check the body integrated unit. | <Ref. to Basic Diagnostic Procedure .> |