Overview - Driver Assistance Systems Control Module

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S6, 2022 Audi A6 Quattro, 2021 Audi S6, 2021 Audi A6 Quattro, and 2020 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Driver Assistance Systems Control Module

Courtesy of AUDI OF AMERICA, LLC

Driver Assistance Systems Control Module -J1121-
- There are different versions. Refer to the Parts Information.
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
Mount
- There are different versions. Refer to the Parts Information.
- For the Driver Assistance Systems Control Module -J1121-
Bolt
- 8 Nm
  - Small mount: quantity: 3
  - Large mount: quantity: 4
Bolt
- Small mount: quantity: 3; tightening sequence Fig 2
- Large mount: quantity: 5; tightening sequence Fig 3
Connector
Connectors
- Allocation. Refer to the appropriate Wiring Diagram.

Small Mount for Driver Assistance Systems Control Module - Tightening Specification and Sequence

Fig 2: Driver Assistance System Control Module Bolts Tightening Sequence (Small Mount)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts to 5 Nm in the following sequence: -1, 2, and 3-.

Large Mount for Driver Assistance Systems Control Module - Tightening Specification and Sequence

Fig 3: Driver Assistance System Control Module Bolts Tightening Sequence (Large Mount)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts to 5 Nm in the following sequence: -1 through 5-.