LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Sebring Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Electronic Control Modules - Except Coupe) >> Transmission Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Control Module: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE: If transmission control module is being replaced with a new or replacement unit, the Pinion Factor and Quick Learn procedures must be performed. (Refer to STANDARD PROCEDURE  )
  1. Install TCM mounting bracket to TCM (Figure) and torque screws to 11 N.m (72 in. lbs.).
  2. Install TCM 60-way connector and torque to 4 N.m (35 in. lbs.).
  3. Install TCM/bracket into position (Figure).
  4. Install and torque TCM bracket-to-PDC bracket mounting screw to 5 N.m (40 in. lbs.).
  5. Install air cleaner assembly into position.
  6. Install and torque air cleaner-to-PCM stud nut to 5 N.m (40 in. lbs.).
  7. Connect battery negative cable.
scientia non olet · About LEMON Manuals