Control System (Body Control Module)

Communications Network
- Notes
- Medium Speed Controller Area Network (MS-CAN) Operation
- High Speed Controller Area Network (HS-CAN) Operation
- Network Termination
- Gateway Module
Communications Network - Hybrid
- Notes
- Network Topology
- Medium Speed Controller Area Network (MS-CAN) Operation
- High Speed Controller Area Network (HS-CAN) Operation
- Network Termination
- Gateway Module
Module Controlled Functions
- Notes
- Post Crash Alert
Customer Preference Items
- Module Configuration and Parameter Chart
Customer Preference Items - Hybrid
- Module Configuration and Parameter Chart - Hybrid
Smart Junction Box (SJB) Removal/Installation
- Notes
- Removal
- Installation
Programmable Module Installation (PMI)
- Programmable Module Installation (PMI) Using the Integrated Diagnostic System (IDS) When the Original Module is Available
- Programmable Module Installation (PMI) Using the Integrated Diagnostic System (IDS) When the Original Module is NOT Available
Module Configuration
- Principles of Operation
- Definition of Terms
- Programmable Module Installation (PMI)
- Module Preprogramming
- Programmable Parameters
- Adaptive Learning and Calibration
- Transmission Identification Block
- Vehicle Identification (VID) Block
- Module Address
- As-Built Data
Passive Anti-Theft System (Pats)
- Notes
- Passive Anti-Theft System (PATS) Function
- Unlimited Key Mode
Passive Anti-Theft System (Pats) Transceiver Removal/Installation
Anti-Theft Security Access
Key Programming Switch State Control
Spare Key Programming - Using Diagnostic Equipment
Integrated KEYHEAD Transmitter (IKT) Key Programming Using Diagnostic Equipment
Key Programming Using Two Programmed Keys
Spare Key Programming - Unlimited Key Mode
- Enabling Unlimited Key Mode
- Disabling Unlimited Key Mode
Passive Anti-Theft System (Pats) Parameter Reset
Remote Keyless Entry Transmitter Programming
AUTOLOCK And Auto-Unlock Programming
- Autolock Programming Using The Power Door Unlock/Lock Procedure
- Autolock Programming Using the Keyless Entry Keypad Procedure (If Equipped)
- Autolock Programming Using the Message Center Procedure (If Equipped)
- Auto-Unlock Programming Using the Power Door Unlock/Lock Procedure
- Auto-Unlock Programming Using the Keyless Entry Keypad Procedure (If Equipped)
- Auto-Unlock Programming Using the Message Center Procedure (If Equipped)
Stepped Unlock Programming
Perimeter Lighting Feature Programming