86 10... Disassembly of base plate

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2013 BMW 135i, 2013 BMW 128i, 2012 BMW 135i, 2012 BMW 128i, and 2011 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Disassembly of bar
refer to 86 10... REPLACING BAR
Disassembly of lashing plate
refer to 86 10... REPLACING LASHING PLATE AND LASHING EYE
Disassembly of 12 volt socket
refer to 86 10... REPLACING 12 VOLT SOCKET
Remove plastic bush/metal bush
refer to 86 10... REMOVING PLASTIC BUSH/METAL BUSH
Disassembly of light guard
refer to 86 10... REPLACING REAR LIGHT
Disassembly of front apron
refer to 86 10... DISASSEMBLY OF FRONT APRON
Disassembly of left and right aprons
refer to 86 10... DISASSEMBLY OF LEFT AND RIGHT APRONS
Disassembly of left and right wheel boxes
refer to 86 10... DISASSEMBLY OF LEFT AND RIGHT WHEEL BOXES
Disassembly of rear apron
refer to 86 10... DISASSEMBLY OF REAR APRON
Disassembly of left and right lamp housings
refer to 86 10... DISASSEMBLY OF LEFT AND RIGHT LAMP HOUSINGS
Disassembly of rivet connection, rear support
refer to 86 10... DISASSEMBLY PROCEDURE OF RIVET CONNECTION, REAR SUPPORT

Unscrew bolts (1).

CAUTION: Before drilling out rivet heads, drive in rivet pins with a punch.
Drill out rivet connections (2).

Installation:

Tightening Torque,

refer to 86 10 32AZ, see 86 10 PLATFORM

Fig 1: Identifying Rivet Connections

Courtesy of BMW OF NORTH AMERICA, INC.