Instrument Cluster Symptom Tests: Notes
NOTE:
Perform SYSTEM ID TEST
before proceeding with following tests. For connector terminal identification and wiring diagrams, see
BODY CONTROL COMPUTER INTRODUCTION article. Perform VERIFICATION TEST: VER-2A
after each repair.
The following instrument cluster symptoms are covered:
- Air Bag Indicator Not Operating Properly
- All Gauges Not Operating
- All Indicators Not Operating
- Brake Indicator Not Operating Properly
- Check Engine Indicator Not Operating Properly
- Check Gauges Indicator Not Operating Properly
- Cruise Indicator Not Operating Properly
- Fuel Gauge Not Operating Properly
- High Beam Indicator Not Operating Properly
- Low Fuel Indicator Not Operating Properly
- O/D OFF Indicator Not Operating Properly
- Oil Pressure Gauge Not Operating Properly
- Seat Belt Indicator Not Operating Properly
- Sentry Key Immobilizer System Indicator (SKIS) Not Operating Properly
- Speedometer Not Operating Properly
- Tachometer Not Operating Properly
- Temperature Gauge Not Operating Properly
- Trans Over Temp Indicator Not Operating Properly